Use the appropriate ONLINE FORM to quickly email us your question. 
From the room
- Using the template provided mark and cut the 235 mm diameter hole in the ceiling
- Remove grill from fan and insert Fan Unit up into the hole created
- Using a Philips screwdriver, secure the fan by screwing down the 3 locking tabs
- Replace the grill
- Install the 'roof' or 'eave' vent, depending on what you decide
From within the roof space
- If you are replacing an old fan, simple plug the power lead in OR engage an electrician to hard wire it
- For a new connection, engage an electrician to set it up with a switch OR to hard wire it
- Mark up the Eave Vent within 3 metres from the fan (use the supplied template)
- Connect the flexible ducting and secure with ducting tape
